| The Southern Freedivers Forum - Spearfishing and Freediving in Victoria http://southernfreedivers.org.au/forums/ |
|
| Rigging a RA Breakaway http://southernfreedivers.org.au/forums/viewtopic.php?f=3&t=2121 |
Page 1 of 1 |
| Author: | Claymore [ 11 Feb 2010, 19:42 ] |
| Post subject: | Rigging a RA Breakaway |
Hi guys, just after a bit of advice as to how I am best to rig up my breakaway. I was intending to try a few different set ups while in NSW but due to the rain I wasn't able to, thus I have 1 day to get it sorted before NZ. I am thinking of attaching the shooting line to a pigtail swivel looped over one end of the breakaway bungee, then attaching the float line speed needle to a shark clip looped over the other end. Any advice would be much appreciated. Cheers, Dave |
|
| Author: | Jazzbox111 [ 12 Feb 2010, 15:35 ] |
| Post subject: | Re: Rigging a RA Breakaway |
My two cents is try to make it as absolutely simple as possible with bits that cant get deformed or crushed and don't require you to attach too many things to too many other things. (hope that is clear?) |
|
| Author: | Shorerider [ 12 Feb 2010, 18:43 ] |
| Post subject: | Re: Rigging a RA Breakaway |
Dave, See the video here: http://www.legendary.com.au/catalog/pro ... cts_id=286 Should be what you're after. Good luck in N/Z Cheers, Shorerider. |
|
| Page 1 of 1 | All times are UTC+11:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|